Unlimited Rapidshare Downloads

Its very easy to fool Rapid Share server if your IP address is assigned by your ISP. Just follow these simple steps:

clean up IE or netscape cookie( In this case the one that belong to rapidshare website)
On Command prompt
type -----> ipconfig /flushdns <---Enter
type -----> ipconfig /release <---Enter
type -----> ipconfig /renew <---Enter
type -----> exit <--------Enter

Or save these commands in a bat file and run it everytime you need to fool Rapidshare server.Remember to clean up rapidshare cookie in your temp Internet files folder.

Now you should be ready to download as many files as you want from their server.

And there is this cool link: paste it in the browser and see
CODE
http://www.google.com/search?lr=&as_qdr=all&q=+.rar+OR+.zip+OR+.pdf+OR+.exe+site%3Arapidshare.de

How to use the Google calculator

Google’s calculator tries to understand the problem you are attempting to solve without requiring you to use special syntax. However, it may be helpful to know the most direct way to pose a question to get the best results. Listed below are a few suggestions for the most common type of expressions (and a few more esoteric ones).

Most operators come between the two numbers they combine, such as the plus sign in the expression 1+1.

Operator Function Example
+ addition 3+44
- subtraction 13-5
* multiplication 7*8
/ division 12/3
^ exponentiation (raise to a power of) 8^2
% modulo (finds the remainder after division) 8%7
choose X choose Y determines the number of ways of choosing a set of Y elements from a set of X elements 18 choose 4
th root of calculates the nth root of a number 5th root of 32
% of X % of Y computes X percent of Y 20% of 150


Some operators work on only one number and should come before that number. In these cases, it often helps to put the number in parentheses.

Operator Function Example
sqrt square root sqrt(9)
sin, cos, etc. trigonometric functions (numbers are assumed to be radians) sin(pi/3)
tan(45 degrees)
ln logarithm base e ln(17)
log logarithm base 10 log(1,000)


A few operators come after the number.

Operator Function Example
! factorial 5!


Other good things to know

You can force the calculator to try and evaluate an expression by putting an equals sign (=) after it. This only works if the expression is mathematically resolvable. For example, 1-800-555-1234= will return a result, but 1/0= will not.

Parentheses can be used to enclose the parts of your expression that you want evaluated first. For example, (1+2)*3 causes the addition to happen before the multiplication.

The in operator is used to specify what units you want used to express the answer. Put the word in followed by the name of a unit at the end of your expression. This works well for unit conversions such as: 5 kilometers in miles.

You can use hexadecimal, octal and binary numbers. Prefix hexadecimal numbers with 0x, octal numbers with 0o and binary numbers with 0b. For example: 0x7f + 0b10010101.

The calculator understands many different units, as well as many physical and mathematical constants. These can be used in your expression. Many of these constants and units have both long and short names. You can use either name in most cases. For example, km and kilometer both work, as do c and the speed of light.

Feel free to experiment with the calculator as not all of its capabilities are listed here. To get you started, we’ve included a few expressions linked to their results.

1 a.u./c
56*78
1.21 GW / 88 mph
e^(i pi)+1
100 miles in kilometers
sine(30 degrees)
G*(6e24 kg)/(4000 miles)^2
0x7d3 in roman numerals
0b1100101*0b1001


More info on:

http://www.google.co.in/help/calculator.html

Maximize Dial-up Modem Settings

Did you know that by changing a few settings you can make your dial-up modem run better? That's right—you might have a fast modem and a good connection, but you're not getting the best performance. With a few adjustments, you can get faster connection speeds.

NOTE: Since every PC configuration is different, these adjustments might not work for everyone.

With Windows 95, 98 & ME you'll need to open your Control Panel ( Start / Control Panel ). Click "System" then choose "Device Manager". Open up "Ports", highlight your modem port (should be COM2), and choose "Properties" near the bottom. When you click "Port Settings", you will see the modem speed listed under "Bits per second".

With Win XP , just hold down the Alt key and double-click "My Computer" to bring up System Properties. Click the "Hardware" tab, then choose the "Device Manager" button. Scroll down to "Modems" and click the little (—) to show your modem, then double click it.

Selecting the "Modem" tab will allow you to adjust the port speed.


Usually, the Maximum Port Speed is on the highest setting (115,000 bps), but sometimes you will find it on a slower default of 9600 bps. If you have a 56k modem, you can crank it up to the maximum setting without any trouble (in most cases). If you live in a cave and have a 28k modem, then the fastest you can do is 57,600 bps.

Win 9x users should also adjust the "Flow Control" near the bottom. The default for this is usually Xon/Xoff which is the software control—change this to "Hardware" if you want to get the most from your modem. Next, click the "Advanced" button to adjust the Receiver Buffer to its highest setting (all the way to the right). If you run into any problems, just turn this one back to the 2/3 setting.

To check/adjust the Receive-Transmit buffers in XP, click the "Advanced" tab of your modem properties then choose the "Advanced Port Settings" button. Make sure that both are set to their highest settings.

There are many more tweaks that can be done in the registry, but the potential for disaster is too high for the average user. Some folks install dial-up accelerators, which basically tweak these registry settings for you and perform other routines to optimize performance.

Just by changing these few settings, though, you should see better performance.

IP

Before you can change your IP you need some information. This information includes your IP range, subnet mask, default gateway, dhcp server, and dns servers.


1. Getting your IP range - Getting information about your IP range is not difficult, I recommend using Neo Trace on your own IP. But for my test just look at your IP address, say it's 24.193.110.13 you can definitely use the IP's found between 24.193.110.1 < [new IP] <>

Windows IP Configuration:

Host Name . . . . . . . . . . . . . . . . . : My Computer Name Here
Primary Dns Suffix . . . . . .. . . . . :
Node Type . . . . . . . . . . . . . . . . .: Unknown
IP Routing Enabled. . . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . . . . . . .: xxxx.xx.x
Description . . . . . . . . . . . . . . . . . . . . : NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI)
Physical Address. . . . . . . . . . . . . . . . . : XX-XX-XX-XX-XX-XX
Dhcp Enabled. . . . . . . . . . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . . . . . . : Yes
IP Address. . . . . . . . . . . . . . . . . . . . . : 24.xxx.xxx.xx
Subnet Mask . . . . . . . . . . . . . . . . . . . .: 255.255.240.0
Default Gateway . . . . . . . . . . . . . . . . . : 24.xxx.xxx.x
DHCP Server . . . . . . . . . . . . . . . . . . . .: 24.xx.xxx.xx
DNS Servers . . . . . . . . . . . . . . . . . . . . : 24.xx.xxx.xxx
24.xx.xxx.xx
24.xx.xxx.xxx
Lease Obtained. . . . . . . . . . . . . . . . . . .:Monday, January 20, 2003 4:44:08 PM
Lease Expires . . . . . . . . . . . . . . . . . . . .:Tuesday, January 21, 2003 3:43:16 AM


This is all the information you will need for now, I suggest you either keep your dos/command prompt window open or copy & paste the information somewhere, to copy right click the window and select text and click once.



III. Changing your IP Address


To change your IP address first pick any IP you like out of your IP range and remember it or write it down. It is usualy a good idea to make sure the IP is dead (except for what we are going to do later on) so just ping it via "ping x.x.x.x" and if it times out then you can use it. Now go to My Computer, then Control Panel. In Control Panel select Network Connections and pick your active connection, probably Local Area Connection or your ISP name. Open that connection by double clicking on the icon in Network Connections, then select Properties under the General Tab. In the new window that pops up select Internet Protocol (TCP/IP) and click properties, it's under the general tab. In this new window select the General tab and choose "Use the following IP address" and for the IP address enter the IP you would like to use (the one you picked from your subnet earlier) and for the Subnet Mask enter the subnet mask you got when your ran ipconfig /all, same goes for the Default Gateway. Now select "Use the following DNS server addresses" and enter the information you got earlier. Now just click OK. Test that it worked, try to refresh a website and if it works you know everything is okay and you are connected. To make sure the change worked type ipconfig again and the IP address should have changed to your new one.



IV. DDoS & DoS Protection


If your firewall shows that you are being DDoSed, this is usually when you are constantly getting attempted UDP connections several times a second from either the same IP address or multiple IP addresses (DDoS), you can protect your self by changing your IP address via the method I described above.



V. Web servers & Other Services

If you know someone on your IP range is running a web server and he or she has pissed you off or you just like messing around you can "steal" their IP address so any DNS going to that IP will show your site instead because you would be running a web server yourself.

To "steal" an IP is to basically use the changing IP address method above and picking an IP that someone that is running a web server has in use. Often you will be able to keep that IP at least for some time, other times you wont be able to use it so just keep trying until it works. You your self will need to have a web server on the same port with your message. You can do this with other services too. You can also DoS or DDoS the IP address you are trying to steal to kick him off the net, but I don't recommend as its pretty illegal, an your ISP will get pissed ;)

Proxies

What is a Proxy Server?

A proxy server is a kind of buffer between your computer and the Internet resources you are accessing. The data you request come to the proxy first, and only then it transmits the data to you. I know many are looking for IP Maskers or Scramblers, but honestly, it aint real easy for the simple fact that any website that you visit needs your IP to send the info packets too. If its scrambled, you will get alot of errors and crazy redirects :P My solution? Read on........... for a good list of Proxy servers try here>> http://www.multiproxy.org/

Why do I need to use proxy servers?

Transfer speed improvement. Proxy servers accumulate and save files that are most often requested by thousands of Internet users in a special database, called “cache”. Therefore, proxy servers are able to increase the speed of your connection to the Internet. The cache of a proxy server may already contain information you need by the time of your request, making it possible for the proxy to deliver it immediately.
Security and privacy. Anonymous proxy servers that hide your IP address thereby saving you from vulnerabilities concerned with it.
Sometimes you may encounter problems while accessing to web server when server administrator restricted access from your IP or even from wide IP range (for example restricting access from certain countries or geographical regions). So you try to access those pages using an anonymous proxy server.

What is a public proxy server?

It is a proxy server which is free and open for everybody on the Internet. Unfortunately most of them are not anonymous.
Free service trying to provide list of public HTTP proxy servers. Usually provide small list of proxies with low percent of functioning servers due to hosting restrictions on CPU time (they simply can't allow themselves to check many proxies every second especially in parallel).

The Solution?

When using an anonymous proxy server you don’t give a anybody chance to find out your IP address to use it in their own interests. ;) If there is a need to make an (inner) proxy connect to the outside world via another (outer) proxy server, you can use the same environment variables as are used to redirect clients to the proxy to make inner proxy use the outer one:
http_proxy
ftp_proxy
gopher_proxy
wais_proxy
E.g. your (inner) proxy server's startup script could look like this:
#!/bin/sh
http_proxy=http://outer.proxy.server:8082/
export http_proxy
/usr/etc/httpd -r /etc/inner-proxy.conf -p 8081

This is a little ugly, so there are also the following directives in the configuration file:
http_proxy http://outer.proxy.server/
ftp_proxy http://outer.proxy.server/
gopher_proxy http://outer.proxy.server/
wais_proxy http://outer.proxy.server/

Yahoo Chat Commands

/join [room] go to what ever room you wish

/invite [buddys name] sends invitation request

/tell [user] [message] private messages a friend

/follow [user] follows a friend

/stopfollow [user] stop following someone

/stopfollow [yourname] to stop them from following you

/goto [user] enters the room the user is in

/away [off] turn your private messages back on

/think [message] (type this to think what you want

/ignore [list] list everyone who you are ignoring

/ignore add [user] add someone to your ignoring list

/ignore [add all] ignores everything going on

Change Your IP In Less Then 1 Minute

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address.